FluoroGrip® concrete systems combine the best of chemical resistant toppings (vinyl ester, epoxy-novolacs, etc.) with fluoropolymer membrane technologies to provide unparalleled protection of concrete containment areas. Toppings range from 1/16" - 3/8" thickness. Final thickness is dependent upon type and frequency of traffic. Pump pads, and vertical surfaces simply incorporate a concrete filler/sealer to prepare the surface prior to installing a fluoropolymer sheets from 5-20 mils thickness.
Fully fluorinated, elastomeric expansion joint and crack bridging systems for extreme chemical
environments and secondary containment. For more details see our Concrete Systems section of the site.
 |
FIGURE 1:
Engineered secondary containment systems utilizing fluoropolymer films with proprietary advanced-adhesive technologies. |
|
FIGURE 2:
Application of epoxy fillers and sealers to prepare concrete. |
 |
|
 |
FIGURE 3:
Saw cut to facilitate embedded top termination. |
|
FIGURE 4:
Fluoropolymer with pre-applied adhesive and film being installed over optional conductive primer (allows inspection). |
 |
|
 |
FIGURE 5:
Application ties into existing surfaces. |
|
